POWERHOBBY 6S 22.8V 4000MAH 120C GRAPHENE + HV LIPO BATTERY W XT90 PLUG

POWERHOBBY 6S 22.8V 4000MAH 120C GRAPHENE + HV LIPO BATTERY W XT90 PLUG

120C Continouse / 240C Brust

Description

The Powerhobby 6S 4000mAh LiPo Battery delivers strong acceleration, dependable voltage and consistent performance for demanding RC applications. Its compact soft-case design provides a practical balance of power, runtime and manageable weight for compatible cars, trucks, buggies, boats, airplanes and drones.

Choose the standard 22.2V 75C LiPo version for reliable everyday performance or the higher-output 22.8V 120C Graphene+ HV version for applications requiring increased voltage and stronger current delivery. The 75C version provides up to a 150C burst rate, while the 120C HV version delivers up to a 240C burst rate.

The 120C versions are available with EC5, XT90 or QS8 connectors. Always verify the battery dimensions, connector type and voltage compatibility before installation.

Features

• 6S lithium-polymer battery
• 4000mAh capacity
• Standard 22.2V and high-voltage 22.8V options
• Available in 75C and 120C discharge ratings
• Up to 150C or 240C burst output
• Graphene+ construction on 120C HV versions
• Compact soft-case design
• JST-XH balance connector
• EC5, XT90 and QS8 connector options
• Strong and consistent power delivery
• Suitable for high-performance RC applications
• Brand new and factory sealed

75C Standard LiPo Specifications

• Battery Type: LiPo
• Cell Count: 6S / 6 Cell
• Nominal Voltage: 22.2V
• Fully Charged Voltage: 25.2V
• Capacity: 4000mAh
• Continuous Discharge Rate: 75C
• Maximum Burst Rate: 150C
• Main Connector: EC5
• Balance Connector: JST-XH
• Length: 134mm
• Width: 44mm
• Height: 35.6mm
• Weight: Approximately 16.5 oz
• Case Type: Soft Case

Available 75C Version

• PHB6S400075EC5 – EC5 Connector

120C Graphene+ HV Specifications

• Battery Type: Graphene+ LiHV
• Cell Count: 6S / 6 Cell
• Nominal Voltage: 22.8V
• Fully Charged Voltage: 26.1V in LiHV mode
• Capacity: 4000mAh
• Continuous Discharge Rate: 120C
• Maximum Burst Rate: 240C
• Recommended Charge Rate: Up to 2C
• Length: 135mm
• Width: 44mm
• Height: 36mm
• Weight: Approximately 16 oz
• Case Type: Soft Case

Available 120C Versions

• PHB6S4000120EC5 – EC5 Connector
• PHB6S4000120QS8 – QS8 Connector
• PHB6S4000120XT90 – XT90 Connector

Fits

• Compatible 1/10-scale RC cars, trucks and buggies
• Compatible 1/8-scale RC cars, trucks and buggies
• Select RC boats and airplanes
• Compatible drones and multirotors
• Other RC models designed for a compatible 6S LiPo or LiHV battery

Fitment depends on the battery-compartment dimensions, selected connector and voltage requirements. Confirm that the battery will physically fit your model and that its electronic speed control supports the selected 6S battery.

A charger with a dedicated LiHV mode is required to charge the 22.8V versions fully to 4.35V per cell. The standard 22.2V version should be charged using a regular LiPo charging mode.

Includes

• One Powerhobby 6S 4000mAh LiPo or LiHV Battery in the selected discharge rating and connector configuration

Warranty

This Powerhobby LiPo battery includes a six-month limited warranty from the original purchase date against defects in materials and workmanship.

The warranty does not cover:

• Physical or crash damage
• Damage caused by hard landings
• Improper installation or mounting
• Punctures, dents or battery deformation
• Overcharging or incorrect charger settings
• Deep discharging or operation below a safe voltage
• Excessive discharge current

Always inspect the battery before and after use. Stop using it immediately if it becomes swollen, punctured, unusually hot or physically damaged. Proof of purchase may be required for warranty service.