POWERHOBBY 5S 19.0V 6000MAH 120C GRAPHENE + HV LIPO BATTERY W XT90 PLUG

POWERHOBBY 5S 19.0V 6000MAH 120C GRAPHENE + HV LIPO BATTERY W XT90 PLUG

120C Continouse / 240C Brust

Description

The Powerhobby 5S 19.0V 6000mAh 120C Graphene+ HV LiPo Battery delivers high-output power, strong acceleration and extended runtime for demanding RC applications. Its 6000mAh capacity provides long operating times, while the high-voltage design offers increased performance for compatible brushless power systems.

With a 120C continuous discharge rating and up to a 240C burst rate, this battery provides consistent current delivery during hard acceleration and other high-load conditions. Advanced cell-stacking technology and high-quality lithium-polymer materials help provide dependable performance throughout each run or flight.

Choose between an EC5 or XT90 main power connector to match your model’s electronic speed control. Always verify the battery-compartment dimensions, connector type and 5S LiHV compatibility before installation.

Features

• High-voltage 5S lithium-polymer battery
• Graphene+ battery construction
• 19.0V nominal voltage
• 6000mAh capacity
• 120C continuous discharge rate
• Up to 240C burst discharge rate
• Strong acceleration and consistent power delivery
• Available with EC5 or XT90 connector
• Suitable for high-performance RC applications
• Recommended charge rate up to 2C
• Brand new and factory sealed

Specifications

• Battery Type: Graphene+ LiHV
• Cell Count: 5S / 5 Cell
• Nominal Voltage: 19.0V
• Fully Charged Voltage: 21.75V in LiHV mode
• Capacity: 6000mAh
• Continuous Discharge Rate: 120C
• Maximum Burst Rate: 240C
• Recommended Charge Rate: 2C
• Length: 134mm
• Width: 44mm
• Height: 47.5mm
• Weight: Approximately 21.4 oz

Available Versions

• PHB5S6000120EC5 – EC5 Connector
• PHB5S6000120XT90 – XT90 Connector

Fits

• Compatible 1/10-scale RC cars, trucks and buggies
• Compatible 1/8-scale RC cars, trucks and buggies
• Select RC boats and airplanes
• Compatible drones and multirotors
• Other RC models designed for a 5S LiHV battery

Fitment depends on the battery-compartment dimensions, selected connector and electronics. Confirm that the battery will physically fit your model and that the electronic speed control supports a 5S battery before use.

A charger with a dedicated LiHV mode is required to charge the battery fully to 4.35V per cell. When charged using a standard LiPo setting, the battery will not reach its maximum rated voltage.

Includes

• One Powerhobby 5S 19.0V 6000mAh 120C Graphene+ HV LiPo Battery with the selected connector

Warranty

This Powerhobby LiPo battery includes a six-month limited warranty from the original purchase date against defects in materials and workmanship.

The warranty does not cover:

• Physical or crash damage
• Damage caused by hard landings
• Improper installation or mounting
• Punctures, dents or battery deformation caused by the user
• Overcharging or incorrect charger settings
• Deep discharging or operation below a safe voltage
• Excessive discharge current

Always inspect the battery before and after use. Stop using it immediately if it becomes swollen, punctured, unusually hot or physically damaged. Proof of purchase may be required for warranty service.