RPM 70412 ESC Cage for the Castle Mamba X 8S ESC

RPM 70412 ESC Cage for the Castle Mamba X 8S ESC

Our ESC Cage for the Castle Mamba X ESC provides a solid, positive mount to keep your new and valuable Castle Mamba-X 8S ESC in place on your ARRMA Kraton 8S or Outcast 8S, even under the most extreme circumstances. It also allows the ESC to be run with or without a fan. Our ESC Cage encases the ESC body only, leaving the fan free for easy removal for wet running. Furthermore, we left air channels along the sides of the ESC to allow air movement, helping to keep the ESC cool.

The four base plate mounting screws can be accessed without removing the top cage, making this one of the easiest ESC Cages we manufacture to remove and install. We include a separate, encased on / off switch mount that bolts directly to our cage in one of two orientations for extreme versatility. Since the switch attaches to the cage, no extra time is needed to remove it during maintenance or if you decide to swap the ESC between vehicles.

Each RPM ESC Cage is molded in black and manufactured from our ridiculously tough blend of engineering grade nylons. They're backed by our limited lifetime warranty against breakage as well. Don't trust your investment to double-sided tape or zip ties.

Tech Notes: The RPM ESC Cage for the Mamba X 8S ESC works with Castle ESCs from the following

Castle part numbers #010-0165-00 & #010-0165-01. Our ESC Cage has been tested and guaranteed to fit the ARRMA Kraton 8S and Outcast 8S running the stock ARRMA Receiver Box Lid #AR320553.