{"title":"MT8 Parts","description":"\u003cp\u003eShop Team Associated MT8 1\/8 RC monster truck replacement parts, upgrades, tires, wheels, suspension, drivetrain components and accessories. Find the parts you need to repair, maintain and customize your MT8.\u003c\/p\u003e","products":[{"product_id":"team-associated-asc25903-mt8-skid-plate-set","title":"Team Associated ASC25903 MT8 Skid Plate Set","description":"\u003cp\u003eThis skid plate set is the replacement underbody protection for the Team Associated Rival MT8 monster truck. Skid plates mount beneath the chassis at the front and rear bulkhead areas, taking the impact when the truck lands hard, drags over curbs, or slides across rocks and roots. They absorb the abuse so the chassis, suspension mounts, and drivetrain housings underneath stay intact.\u003c\/p\u003e\u003cp\u003eOn a big-bore monster truck that spends its life jumping and bashing, these are the parts that wear fastest. Once a skid plate is gouged, cracked, or worn thin, it stops shielding what is behind it, and repair bills climb quickly from there.\u003c\/p\u003e\u003cp\u003eThis set is a direct replacement for the factory skid plates on the Rival MT8, bolting into the original mounting locations with no trimming or modification needed. Fitting fresh plates restores full protection and lets the truck slide cleanly over obstacles instead of catching on them. Keeping a spare set in the pit box means a hard landing does not cut the session short.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089391104322,"sku":"ASC25903","price":13.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25903_md__97702.1725451016.jpg?v=1788546495"},{"product_id":"team-associated-asc20520-rival-mt8-rtr","title":"Team Associated ASC20520 Rival MT8 RTR","description":"\u003cp\u003eThe Rival MT8 is Team Associated's 1:8 scale monster truck, and it is powerful, purposeful, and built to last. It runs on a single 6S or 4S LiPo battery and is driven by a high-torque 2100kV Reedy brushless motor, giving it the kind of power a truck this size needs to move with authority.\u003c\/p\u003e\u003cp\u003eStrength starts at the chassis. A 4mm aluminum main chassis forms the backbone, and the drivetrain is a sealed, all-metal geared system designed to survive the loads a 1:8 scale monster truck generates. A four-position adjustable wheelie bar lets you control how the truck behaves under hard acceleration.\u003c\/p\u003e\u003cp\u003eSuspension is long-travel and fully independent, with 16mm bore shocks at each corner absorbing landings and rough terrain. Aggressive monster truck tires provide traction on asphalt, lawn, and dirt, so the MT8 is not limited to a single type of surface. It arrives fully assembled and ready to run, so you supply a battery and go.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089403064642,"sku":"ASC20520","price":489.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/Rival-MT8-1280x855_lg__20606.1725441964.webp?v=1788546716"},{"product_id":"team-associated-asc20521-rival-mt8-ready-to-run","title":"Team Associated ASC20521 Rival MT8 Ready-To-Run","description":"\u003cp\u003eThe Rival MT8 is Team Associated's 1:8 scale monster truck and the latest step in their monster truck line-up. It is capable of running on a single 6S or 4S LiPo battery, with a high-performance 2100kV high-torque Reedy brushless motor providing the muscle.\u003c\/p\u003e\u003cp\u003eThe core of the truck is a 4mm aluminum main chassis reinforced by rigid aluminum center chassis supports, a structure meant to survive landings and impacts rather than flex under them. A four-position adjustable wheelie bar lets you set how aggressively the front end lifts under power. The drivetrain is a sealed, all-metal geared system built for the loads that come with 1:8 scale power.\u003c\/p\u003e\u003cp\u003eAt each corner, independent suspension works through 16mm shocks that handle both jump landings and broken ground. Monster truck tires deliver maximum traction across varied terrain. The truck arrives fully assembled and ready to run, so all you need to add is a battery pack and a charger.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089403130178,"sku":"ASC20521","price":489.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/20521-MT8Teal_lg__74429.1725441957.webp?v=1788546713"},{"product_id":"team-associated-asc25900-mt8-body-accessories-set","title":"Team Associated ASC25900 MT8 Body Accessories Set","description":"\u003cp\u003eThe Team Associated ASC25900 body accessories set is the direct replacement trim and detail package for the RIVAL MT8 monster truck. These are the molded pieces that finish off the shell and give the truck its scale monster truck look, and they mount to the body and chassis using the factory locations.\u003c\/p\u003e\u003cp\u003eBody accessory parts live on the outside of the truck, which makes them the first components to get scraped, cracked or torn off in a roll or a hard landing. Because they are cosmetic rather than structural, they are easy to overlook until the truck starts looking beaten up, and replacing them is the quickest way to bring a well-run MT8 back to showroom condition without touching the chassis.\u003c\/p\u003e\u003cp\u003eThis set is a straight factory replacement, so everything lines up with the existing mounting points and installs with your original hardware. Fitting it is a simple bench job that requires no trimming or drilling. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089419088194,"sku":"ASC25900","price":15.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25900_md__08546.1725451014.jpg?v=1788547170"},{"product_id":"team-associated-asc25901-mt8-side-rail-set","title":"Team Associated ASC25901 MT8 Side Rail Set","description":"\u003cp\u003eThe Team Associated ASC25901 side rail set is the direct replacement side rail package for the RIVAL MT8 monster truck. The side rails run along the outside of the chassis between the front and rear ends, giving the truck its scale tube-frame appearance while adding a layer of protection along the flanks of the chassis.\u003c\/p\u003e\u003cp\u003eSide rails take the hits in side impacts, barrel rolls and slides into walls or curbs, which makes them a common casualty on a truck that gets driven hard. A cracked or missing rail leaves the chassis edge and the mounting posts exposed to the next impact, so replacing them keeps that protection in place and stops damage from spreading to more expensive parts.\u003c\/p\u003e\u003cp\u003eThis set installs at the factory mounting points with the original screws and hardware, so there is no fitting or modification involved. It is the straightforward way to repair crash damage or to restore the finished look of a well-used truck. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089419153730,"sku":"ASC25901","price":15.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25901_md__91134.1725451015.jpg?v=1788547171"},{"product_id":"team-associated-asc25902-rival-mt8-wheels","title":"Team Associated ASC25902 RIVAL MT8 Wheels","description":"\u003cp\u003eThe Team Associated ASC25902 wheels are the direct replacement monster truck wheels for the RIVAL MT8. The wheel is what holds the tire in shape and transfers every bit of drive, braking and steering load from the axle into the tread, so a true, undamaged wheel is fundamental to how the truck puts power down and how it corners.\u003c\/p\u003e\u003cp\u003eMonster truck wheels take a beating from curbs, rocks and hard landings, and they also wear out at the hex and bolt-on flange where the drivetrain load concentrates. A cracked bead or an egged-out hex causes vibration, wobble and tires that spin on the rim, all of which get worse the longer they are left.\u003c\/p\u003e\u003cp\u003eThese are the factory-spec wheels for the platform, so they fit the stock hexes and use the original wheel nuts with no adapters required. Detailed dimensional specifications for this wheel are listed on the Team Associated wheel charts. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089419186498,"sku":"ASC25902","price":16.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25902_md__35876.1725450886.jpg?v=1788547171"},{"product_id":"team-associated-asc25914-rival-mt8-body-mounts","title":"Team Associated ASC25914 Rival MT8 Body Mounts","description":"\u003cp\u003eThe Team Associated ASC25914 Body Mount Set supplies the front and rear mounting posts that hold the body securely in place on your Rival MT8 monster truck. Body mounts take a beating on a big truck like the MT8, absorbing impacts every time it rolls, lands hard, or clips an obstacle, so keeping a fresh set on hand means a broken mount never ends your run day.\u003c\/p\u003e\u003cp\u003eThis is a direct replacement for the mounts originally fitted to the Rival MT8, so it installs using the stock hardware and locations with no modification or trimming required. Fitment is specific to the Rival MT8 platform.\u003c\/p\u003e\u003cp\u003eWhether you are rebuilding after a hard crash or restoring correct body height and alignment on a well used truck, this set returns the chassis to factory specification. Properly located body mounts also protect the body itself, spreading load across the mounting points instead of tearing the lexan around the holes. Order a spare set to keep in your pit box alongside your other MT8 spares.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089419317570,"sku":"ASC25914","price":15.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25914_md__37676.1725450943.jpg?v=1788547174"},{"product_id":"team-associated-asc25915-rival-mt8-caster-blocks","title":"Team Associated ASC25915 Rival MT8 Caster Blocks","description":"\u003cp\u003eThis Team Associated ASC25915 set gathers the caster blocks, steering blocks, and rear hubs for the Rival MT8 into a single replacement package, covering the suspension uprights at all four corners. These components carry the axles and locate the wheels, setting the steering geometry up front and holding the rear wheels square under power, so their condition has a direct effect on how predictably the truck tracks and turns.\u003c\/p\u003e\u003cp\u003eBecause they sit at the outside edge of the suspension, these are among the first parts to take damage in a rollover or a hard hit. Cracked or elongated blocks introduce slop that shows up as vague steering and inconsistent handling.\u003c\/p\u003e\u003cp\u003eThe set is a direct replacement for the original components on the Rival MT8, installing in the stock positions with the stock hardware. Rebuilding all four corners at once restores factory geometry and removes accumulated wear rather than chasing it one corner at a time. Keep a set in your spares box so a broken upright does not cut a day short.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089420890434,"sku":"ASC25915","price":19.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25915_md__33286.1725450944.jpg?v=1788547217"},{"product_id":"team-associated-asc25917-rival-mt8-turnbuckles","title":"Team Associated ASC25917 Rival MT8 Turnbuckles","description":"\u003cp\u003eThe Team Associated ASC25917 Turnbuckle Set replaces the adjustable links on the Rival MT8, giving you a complete fresh set of steering and camber links in one package. Turnbuckles are threaded at both ends so you can dial camber and toe by simply spinning the link, letting you tune handling without disassembling the suspension.\u003c\/p\u003e\u003cp\u003eThese links sit in an exposed position and take direct hits on a monster truck of this size. A bent turnbuckle throws off alignment immediately, causing pulling under acceleration, uneven tire wear, and inconsistent steering feel, so replacement is the fastest route back to a truck that drives straight.\u003c\/p\u003e\u003cp\u003eThis set is a direct replacement for the links originally supplied on the Rival MT8 and installs into the stock rod ends and pivot points with no modification. Fitment is specific to the Rival MT8 platform. Fitting a full set at once means every link is straight and threaded cleanly, making setup changes easier and repeatable between runs.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089421906242,"sku":"ASC25917","price":34.84,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25917_md__92585.1725450922.jpg?v=1788547229"},{"product_id":"team-associated-asc25919-rival-mt8-mounted-tires","title":"Team Associated ASC25919 Rival MT8 Mounted Tires","description":"\u003cp\u003eThe Team Associated ASC25919 mounted tire and wheel set gives you a ready to run replacement for the Rival MT8, with the tires already fitted to the wheels so you can bolt them straight on. No gluing, no waiting for adhesive to cure, and no wrestling with beads at the track.\u003c\/p\u003e\u003cp\u003eTires are the single biggest influence on how a monster truck puts power down and how it hooks up through corners. Once the tread rounds off or the sidewalls tear, traction and steering both fall away, and no amount of setup change brings them back. Fresh rubber restores the grip the truck had out of the box.\u003c\/p\u003e\u003cp\u003eThis set is a direct replacement for the tires and wheels supplied on the Rival MT8, using the stock hex and wheel nuts. Fitment is specific to the Rival MT8 platform. Many drivers keep a second mounted set on the shelf so a shredded tire mid session means a quick wheel swap instead of an early finish.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089422627138,"sku":"ASC25919","price":44.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25919_md__07946.1725450924.jpg?v=1788547241"},{"product_id":"team-associated-asc25947-rival-mt8-rod-ends","title":"Team Associated ASC25947 Rival MT8 Rod Ends","description":"\u003cp\u003eThe Rival MT8 rod ends are the pivoting link connections that join your suspension turnbuckles and steering links to the arms, hubs, and chassis on the Team Associated Rival MT8 monster truck. Each rod end threads onto a turnbuckle and captures a ball stud, letting the suspension cycle freely while holding your camber, toe, and steering geometry exactly where you set it.\u003c\/p\u003e\u003cp\u003eRod ends are a wear item on any big-bore monster truck. Hard landings, roll-overs, and general bashing gradually stretch the ball cup or crack the body, and a loose or split rod end shows up as vague steering, wandering camber, and inconsistent handling. Keeping a fresh set on the bench means you can swap out a worn link in minutes instead of ending a run early.\u003c\/p\u003e\u003cp\u003eThis is a direct replacement for the factory rod ends fitted to the Rival MT8, so it installs with no modification and no extra hardware. Simply thread the new rod end onto the existing turnbuckle, match your old link length, and snap it back onto the ball stud.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089422954818,"sku":"ASC25947","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25947_md__62651.1725450744.jpg?v=1788547248"},{"product_id":"team-associated-asc81265-m4x8mm-bhcs-screws","title":"Team Associated ASC81265 M4x8mm BHCS Screws","description":"\u003cp\u003eThese M4x8mm button head cap screws are replacement hardware for the Team Associated Rival MT8 monster truck. Button head screws are used throughout the chassis where a low, rounded head is needed, including bulkheads, skid plates, shock mounts, servo mounts, and body post brackets, and the M4 diameter handles the higher loads found on a large scale truck.\u003c\/p\u003e\u003cp\u003eScrews are the easiest part of an RC truck to lose and the easiest to strip. A rounded out hex drive or a damaged thread turns a five minute repair into a long one, and running a loose or missing screw lets parts shift under load and damage the components around them. Having a fresh pack in the pit box lets you replace suspect hardware during routine maintenance rather than chasing rattles later.\u003c\/p\u003e\u003cp\u003eThese are direct replacements for the factory Rival MT8 screws of this size, so they drop straight into the existing holes with no modification required. Use them for a full rebuild, a crash repair, or simply to restock the hardware you have already used up.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089422987586,"sku":"ASC81265","price":4.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/81265_md__35330.1725450811.jpg?v=1788547249"},{"product_id":"team-associated-asc89506-hook-loop-battery-straps","title":"Team Associated ASC89506 Hook Loop Battery Straps","description":"\u003cp\u003eThese hook and loop battery straps secure your battery pack to the chassis on a wide range of Team Associated large scale vehicles. The strap wraps over the pack and cinches down against the chassis or battery tray, holding the battery firmly in place through jumps, hard landings, and rough terrain so weight stays where you set it and the wiring is never pulled on.\u003c\/p\u003e\u003cp\u003eStraps stretch, fray, and lose their grip over time, especially after repeated exposure to dirt, fuel, and moisture. A worn strap that releases mid run can let the pack shift or come loose entirely, which upsets handling and risks damage to the battery and the electronics mounted around it. Replacing tired straps is inexpensive insurance for expensive components.\u003c\/p\u003e\u003cp\u003eFitment covers the SC8, SC8e, RC8Be, RC8.2e, SC8.2e, RC8B3e, RC8T3e, RC8B3.1e, RC8T3.1e, RC8B3.2e, RC8T3.2, Nomad DB8 Limited Edition, and Rival MT8. These are direct replacements for the factory straps and install without tools or modification.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089423053122,"sku":"ASC89506","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/89506_md__28048.1725453098.jpg?v=1788547250"},{"product_id":"team-associated-asc25904-mt8-spur-gear-48t","title":"Team Associated ASC25904 MT8 Spur Gear 48T","description":"\u003cp\u003eThe Team Associated ASC25904 spur gear is the 48-tooth, Mod 1 replacement spur for the RIVAL MT8 monster truck. The spur gear meshes with the motor pinion and is the first stage of the drivetrain, taking motor output and passing it into the center gearbox and on to the differentials, so it sets the truck's overall gear ratio together with the pinion you run.\u003c\/p\u003e\u003cp\u003eSpur gears are a wear item on any high-power monster truck. Teeth round off over time, and a stripped or chipped spur causes skipping under throttle, a rattling drivetrain and eventually a complete loss of drive. A worn spur also damages the pinion it runs against, so replacing it early protects the rest of the gear train.\u003c\/p\u003e\u003cp\u003eThis is the factory 48T Mod 1 gear for the platform, so it drops onto the stock slipper or gear mount with no shimming or modification and preserves the original gear ratio. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089423315266,"sku":"ASC25904","price":15.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25904_md__29281.1725451017.jpg?v=1788547258"},{"product_id":"team-associated-asc25905-mt8-battery-box","title":"Team Associated ASC25905 MT8 Battery Box","description":"\u003cp\u003eThe Team Associated ASC25905 battery box and ESC tray is the direct replacement electronics mounting assembly for the RIVAL MT8 monster truck. It holds the battery pack and provides the mounting platform for the speed control, keeping both components located on the chassis and shielded from dirt, water spray and impact damage.\u003c\/p\u003e\u003cp\u003eThe box has inside dimensions of 151mm maximum length, 146mm minimum length and 48mm width, and it uses hook-and-loop battery straps to lock the pack down so it cannot shift under hard acceleration, braking or a heavy landing. A battery that moves around changes the truck's weight balance mid-corner and puts strain on the wiring and connectors.\u003c\/p\u003e\u003cp\u003eBattery boxes crack at the mounting tabs and strap slots after enough hard landings, and a broken tray leaves your most expensive electronics loose in the chassis. This is a direct factory replacement that installs at the original mounting points with your existing hardware, no modification required. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089423380802,"sku":"ASC25905","price":15.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25905_md__06516.1725451018.jpg?v=1788547259"},{"product_id":"team-associated-asc25906-mt8-servo-bellcrank-mount","title":"Team Associated ASC25906 MT8 Servo Bellcrank Mount","description":"\u003cp\u003eThe Team Associated ASC25906 set includes the servo mount, bellcrank mount and top plate for the RIVAL MT8 monster truck. These pieces form the steering support structure on the chassis, holding the steering servo in place and locating the bellcranks that convert servo output into left and right movement at the front wheels.\u003c\/p\u003e\u003cp\u003eSteering feel depends on how solidly this assembly is mounted. A cracked servo mount or a worn bellcrank post lets the servo flex under load, which shows up as vague steering, slop at center and inconsistent turn-in from one corner to the next. Because everything here sits at the front of the chassis, it also absorbs a share of the impact in a head-on crash.\u003c\/p\u003e\u003cp\u003eReplacing these parts restores tight, precise steering and takes the strain off the servo gears and output shaft. The set uses the factory mounting locations and original hardware, so it installs with no modification. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089423413570,"sku":"ASC25906","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25906_md__87410.1725450934.jpg?v=1788547259"},{"product_id":"team-associated-asc25907-mt8-center-gearbox-set","title":"Team Associated ASC25907 MT8 Center Gearbox Set","description":"\u003cp\u003eThe Team Associated ASC25907 center gearbox set is the direct replacement center transmission housing for the RIVAL MT8 monster truck. The center gearbox sits in the middle of the chassis and is the hub of the four-wheel-drive system, carrying the slipper and spur gear assembly and splitting drive between the front and rear driveshafts.\u003c\/p\u003e\u003cp\u003eThese housings hold the bearings and shafts in alignment, which is what sets and holds correct gear mesh. Once a case is cracked, a bearing pocket is worn oval or the halves no longer clamp tightly, the gears begin to move under load. The result is drivetrain noise, uneven wear, stripped spur teeth and eventually a driveline that binds or skips under throttle.\u003c\/p\u003e\u003cp\u003eInstalling a fresh center gearbox restores proper bearing support and mesh, which protects the spur, pinion and driveshafts. The set uses the factory hole pattern so your existing internals and hardware transfer over during a rebuild with no modification. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089423479106,"sku":"ASC25907","price":15.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25907_md__04503.1725450935.jpg?v=1788547260"},{"product_id":"team-associated-asc25909-mt8-shock-towers","title":"Team Associated ASC25909 MT8 Shock Towers","description":"\u003cp\u003eThe Team Associated ASC25909 set covers the shock towers and center brace mounts for the RIVAL MT8 monster truck. The shock towers stand above the front and rear gearboxes and carry the upper shock mounting positions, so they set shock angle and leverage and take the full force of every landing straight through the dampers.\u003c\/p\u003e\u003cp\u003eBecause they are loaded in every impact, shock towers crack at the mounting holes and bend on hard nose-in landings. Even slight damage changes shock angle, which alters how much the suspension resists compression and makes the truck sit or handle differently from one end to the other. The center brace mounts tie the chassis structure together, adding stiffness through the middle of the truck.\u003c\/p\u003e\u003cp\u003eReplacing these parts restores the factory suspension geometry and chassis rigidity in one job. Everything uses the original mounting holes and existing hardware, so no drilling or fitting is required during a rebuild. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089423511874,"sku":"ASC25909","price":16.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25909_md__91873.1725450937.jpg?v=1788547261"},{"product_id":"team-associated-asc25921-rival-mt8-painted-body","title":"Team Associated ASC25921 Rival MT8 Painted Body","description":"\u003cp\u003eThe Team Associated ASC25921 painted body set is a factory finished replacement shell for the Rival MT8, arriving trimmed and decorated so it goes on the truck with no prep work. Skip the masking, spraying, and curing time and get straight back to driving.\u003c\/p\u003e\u003cp\u003eA monster truck body takes constant abuse, from rollovers to hard landings to contact with other trucks, and once it splits or tears the damage spreads fast. A fresh shell restores the appearance of the truck and protects the chassis, electronics, and drivetrain underneath from dirt and impact.\u003c\/p\u003e\u003cp\u003eThis set is a direct replacement for the body originally fitted to the Rival MT8, matching the factory body mount locations so it drops onto the stock posts without drilling or modification. Fitment is specific to the Rival MT8 platform. Keeping a spare shell on hand means a shattered body never sidelines the truck, and it is the quickest way to make a well run MT8 look new again.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089423806786,"sku":"ASC25921","price":69.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25921_md__50660.1725450926.jpg?v=1788547269"},{"product_id":"team-associated-asc25653-m3x35mm-shcs-screws","title":"Team Associated ASC25653 M3x35mm SHCS Screws","description":"\u003cp\u003eThis Team Associated ASC25653 hardware pack supplies M3x35 mm socket head cap screws, the longer fasteners used to secure major assemblies where a standard short screw simply will not reach. Socket head cap screws take a hex driver rather than a Phillips bit, which means far more torque transfer and much less risk of stripping the head during assembly or a trackside repair.\u003c\/p\u003e\u003cp\u003eScrews are the parts most often lost on the workbench or shaken loose on a rough run, and a missing long screw can stop a build cold. Keeping a pack of the correct length on hand means you finish the job with the right fastener rather than substituting something that does not thread fully or bottoms out early.\u003c\/p\u003e\u003cp\u003eThese are direct replacements for the factory screws used on the MGT 8.0 and the Rival MT8, matching the original thread pitch, length, and head size exactly. Use them during scheduled maintenance to replace fasteners with rounded hex sockets before they become a problem that costs you a run.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089424200002,"sku":"ASC25653","price":4.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25653_md__56810.1725453334.jpg?v=1788547275"},{"product_id":"team-associated-asc25910-mt8-arm-mount-covers","title":"Team Associated ASC25910 MT8 Arm Mount Covers","description":"\u003cp\u003eThe Team Associated ASC25910 arm mount cover set is the direct replacement suspension mount cover package for the RIVAL MT8 monster truck. These covers clamp over the front and rear suspension arm mounts, capturing the hinge pins so they cannot walk out of position while the suspension cycles.\u003c\/p\u003e\u003cp\u003eThe covers do quiet but important work. They hold the inner hinge pins securely, which keeps the arms located and stops the pins from wearing their way out of the mounts under load. They also cap the top of the mount blocks and help keep dirt and debris out of the pivot area, where grit accelerates wear on both the pins and the arms.\u003c\/p\u003e\u003cp\u003eA cracked or missing cover lets a hinge pin slide loose, and a dropped pin means an arm that comes free mid-run. Replacing worn covers is a cheap way to avoid that. The set installs at the factory locations with your existing screws and needs no modification. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089426231618,"sku":"ASC25910","price":10.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25910_md__53218.1725450938.jpg?v=1788547334"},{"product_id":"team-associated-asc25911-mt8-suspension-arm-set","title":"Team Associated ASC25911 MT8 Suspension Arm Set","description":"\u003cp\u003eThe Team Associated ASC25911 suspension arm set is the direct replacement arm package for the RIVAL MT8 monster truck. The suspension arms locate the hubs and axles at all four corners, carry the shocks and control camber and toe change through the travel, so they determine how the truck tracks under power, absorbs bumps and settles after a jump.\u003c\/p\u003e\u003cp\u003eArms are among the most frequently replaced parts on a monster truck because they take the load in every crash, tumble and cased landing. A cracked or twisted arm shows up as inconsistent handling, uneven ride height or a wheel that no longer sits square under the truck, and it puts extra strain on the hinge pins and mounts around it.\u003c\/p\u003e\u003cp\u003eThis set drops straight into the original pivot locations and reuses your existing hinge pins, shocks and hardware, so a rebuild needs no fitting or modification. Buying the full set is the efficient way to refresh a well-used chassis or stock spares ahead of a hard weekend. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089426297154,"sku":"ASC25911","price":24.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25911_md__05133.1725450939.jpg?v=1788547335"},{"product_id":"team-associated-asc25912-mt8-wheelie-bar-set","title":"Team Associated ASC25912 MT8 Wheelie Bar Set","description":"\u003cp\u003eThe Team Associated ASC25912 wheelie bar set is the direct replacement rear wheelie bar assembly for the RIVAL MT8 monster truck. The wheelie bar extends behind the chassis and rides just off the ground, catching the back of the truck when the front end lifts under hard acceleration so that power goes into forward drive instead of flipping the truck over.\u003c\/p\u003e\u003cp\u003eOn high-traction surfaces and steep launches a working wheelie bar is what lets you use full throttle without losing steering. Keeping the front wheels down means the truck stays pointed where you aim it out of a corner, and the bar also stops the rear of the chassis from dragging when the truck lands nose-high off a jump.\u003c\/p\u003e\u003cp\u003eThe bar arms and their wheels absorb repeated impacts, so bent arms, flat-spotted rollers and worn mounting points are normal wear items on a truck that gets driven hard. This set uses the factory mounting locations and original hardware, so installation needs no modification. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089426395458,"sku":"ASC25912","price":27.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25912_md__84173.1725450940.jpg?v=1788547336"},{"product_id":"team-associated-asc25913-mt8-front-bumper-set","title":"Team Associated ASC25913 MT8 Front Bumper Set","description":"\u003cp\u003eThe Team Associated ASC25913 front bumper set is the direct replacement front impact protection for the RIVAL MT8 monster truck. The bumper mounts at the nose of the chassis ahead of the front gearbox and is the first thing to make contact in a head-on hit, absorbing and spreading the impact so it does not travel straight into the gearbox, suspension mounts and steering components behind it.\u003c\/p\u003e\u003cp\u003eFront bumpers are consumable parts by design. They crack, tear at the mounting tabs and get chewed up against curbs, walls and jump faces, and once one is broken the chassis nose and the front end take the next impact directly. Those repairs cost far more than a bumper does.\u003c\/p\u003e\u003cp\u003eFitting a fresh bumper restores full crash protection and cleans up the front of the truck at the same time. The set installs at the original mounting points using your existing hardware, so there is no drilling, trimming or modification involved. Fits the RIVAL MT8. Genuine Team Associated replacement part.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089426460994,"sku":"ASC25913","price":15.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25913_md__70603.1725450941.jpg?v=1788547337"},{"product_id":"team-associated-asc25927-rival-mt8-pinion-gear-11t","title":"Team Associated ASC25927 Rival MT8 Pinion Gear 11T","description":"\u003cp\u003eThe Team Associated ASC25927 pinion gear is an 11 tooth Mod 1 gear for the Rival MT8, mounting on the motor shaft and driving the spur gear. Pinion tooth count sets the overall gear ratio, which controls the balance between acceleration off the corner and top speed down the straight, so having the right pinion on hand is a basic tuning requirement.\u003c\/p\u003e\u003cp\u003ePinions wear over time and can be damaged by a stripped mesh, a slipped set screw, or debris pulled into the gear train. A worn pinion chews the spur quickly, so replacing it early protects the more expensive part behind it.\u003c\/p\u003e\u003cp\u003eThis gear is a direct replacement for the Mod 1 pinion used on the Rival MT8 and installs on the stock motor shaft with the stock set screw. Fitment is specific to the Rival MT8 platform. Keep a spare in the pit box so a damaged gear does not end a session, and always set your mesh carefully after fitting a new one.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089427509570,"sku":"ASC25927","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25927_md__02349.1725450932.jpg?v=1788547366"},{"product_id":"team-associated-asc25928-rival-mt8-arm-mounts","title":"Team Associated ASC25928 Rival MT8 Arm Mounts","description":"\u003cp\u003eThe Team Associated ASC25928 arm mounts locate the suspension arms on the Rival MT8, holding the inner hinge pins and setting the pivot points the arms swing on. Because they anchor the suspension to the chassis and bulkheads, these mounts carry every impact load the arms feed into the truck, from hard landings to full speed contact with obstacles.\u003c\/p\u003e\u003cp\u003eOnce a mount cracks or the pin bores wear oval, the arm gains play it should not have. That slop shows up as vague handling, changing camber and toe under load, and it accelerates wear on the hinge pins and arms themselves.\u003c\/p\u003e\u003cp\u003eThese mounts are a direct replacement for the parts originally fitted to the Rival MT8, dropping into the stock locations with the stock screws and hinge pins, so no modification is needed. Fitment is specific to the Rival MT8 platform. Fitting fresh mounts restores the factory suspension geometry and tightens up a truck that has started to feel loose.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089427902786,"sku":"ASC25928","price":15.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25928_md__88570.1725450933.jpg?v=1788547379"},{"product_id":"team-associated-asc25929-rival-mt8-chassis-plate","title":"Team Associated ASC25929 Rival MT8 Chassis Plate","description":"\u003cp\u003eThe Team Associated ASC25929 chassis plate is the main structural backbone of the Rival MT8, carrying the bulkheads, motor and gearbox, battery, and electronics, and tying the front and rear of the truck together. Everything on the truck references this plate, so its condition sets how square and consistent the whole chassis is.\u003c\/p\u003e\u003cp\u003eA bent or gouged chassis is one of the hardest problems to diagnose because the symptoms look like a setup issue. The truck pulls to one side, corners unevenly left to right, or refuses to hold a setting no matter how the suspension is adjusted. Replacing the plate resets the truck to a known straight baseline.\u003c\/p\u003e\u003cp\u003eThis plate is a direct replacement for the chassis originally fitted to the Rival MT8, using the stock mounting holes so every component transfers straight across during the rebuild. Fitment is specific to the Rival MT8 platform. A chassis swap is the natural point to strip, clean, and inspect the rest of the truck.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089428066626,"sku":"ASC25929","price":80.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25929_md__22722.1725450919.jpg?v=1788547391"},{"product_id":"team-associated-asc25931-rival-mt8-cva-set","title":"Team Associated ASC25931 Rival MT8 CVA Set","description":"\u003cp\u003eThe Team Associated ASC25931 CVA set supplies constant velocity axles for the Rival MT8, the driveshafts that transmit power from the differential outdrives to the wheel hubs while the suspension moves through its travel. A CVA design keeps drive smooth through steering and suspension angles, which is what lets the truck put power down cleanly even when the arms are working hard.\u003c\/p\u003e\u003cp\u003eDriveshafts are high stress parts. Landings, wheel speed changes, and hard impacts all load them, and a twisted or worn axle causes vibration, binding, and unpredictable power delivery before it eventually fails outright.\u003c\/p\u003e\u003cp\u003eThis set is a direct replacement for the CVAs originally supplied on the Rival MT8, fitting the stock outdrives, pins, and hubs with no modification required. Fitment is specific to the Rival MT8 platform. Replacing the axles as a set keeps drivetrain wear even across the truck and restores the smooth, consistent drive the MT8 had when new. Keep a spare set with your MT8 spares.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089429049666,"sku":"ASC25931","price":49.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25931_md__85569.1725450921.jpg?v=1788547418"},{"product_id":"team-associated-asc25933-rival-mt8-shock-shafts","title":"Team Associated ASC25933 Rival MT8 Shock Shafts","description":"\u003cp\u003eThe Team Associated ASC25933 shock shaft set replaces the shafts inside the shocks on the Rival MT8, the polished rods that carry the piston through the shock body and pass the suspension load into the damper. Shaft condition matters more than most drivers expect, because a scratched or bent shaft ruins the seal it runs through and lets oil escape.\u003c\/p\u003e\u003cp\u003eOnce a shock starts leaking, damping fades within a few runs and the truck begins to bottom out, pack up over rough ground, and land badly. Fitting fresh shafts is the fix that actually solves it, rather than simply refilling the oil again.\u003c\/p\u003e\u003cp\u003eThese shafts are a direct replacement for the parts originally fitted to the Rival MT8 and work with the stock pistons, seals, and shock bodies with no modification. Fitment is specific to the Rival MT8 platform. Rebuilding all four shocks with new shafts at the same time keeps damping balanced corner to corner and returns consistent suspension performance.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089430098242,"sku":"ASC25933","price":15.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25933_md__91673.1725450909.jpg?v=1788547431"},{"product_id":"team-associated-asc25922-rival-mt8-clear-body","title":"Team Associated ASC25922 Rival MT8 Clear Body","description":"\u003cp\u003eThe Team Associated ASC25922 clear body set is an unpainted replacement shell for the Rival MT8, supplied ready for you to mask, paint, and finish exactly how you want it. Starting from a clear shell means you control the whole scheme, from a simple two tone layout to a full custom design, rather than living with a factory finish.\u003c\/p\u003e\u003cp\u003eA monster truck shell absorbs a huge amount of punishment, taking the brunt of rollovers, hard landings, and door to door contact until it finally splits. Replacing a cracked body restores protection for the chassis, electronics, and drivetrain packed underneath, and it keeps dirt and debris out of the truck.\u003c\/p\u003e\u003cp\u003eThis shell is a direct replacement for the body originally fitted to the Rival MT8, matching the factory body post locations so it mounts without drilling or reworking the mounts. Fitment is specific to the Rival MT8 platform. Painters often keep a spare on the shelf so they can build the next scheme while the current one is still on the truck.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089430589762,"sku":"ASC25922","price":59.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25922_md__24653.1725450927.jpg?v=1788547446"},{"product_id":"team-associated-asc25934-rival-mt8-shock-springs","title":"Team Associated ASC25934 Rival MT8 Shock Springs","description":"\u003cp\u003eThe Team Associated ASC25934 shock spring set supplies front and rear springs for the Rival MT8, the components that carry the weight of the truck and control how the suspension loads and rebounds over jumps and rough ground. The front springs measure 80.00mm free length with 11.5 total coils and a rate of 4.90 lb\/in, while the rear springs measure 95.00mm free length with 14.5 total coils and a rate of 4.00 lb\/in. Both use 1.8mm wire with a 20.5mm inner diameter and 24.1mm outer diameter.\u003c\/p\u003e\u003cp\u003eSprings lose their rate over time as they take a set from repeated compression, and a sagging spring quietly changes ride height, weight transfer, and landing behavior long before you notice why the truck feels wrong.\u003c\/p\u003e\u003cp\u003eThis set is a direct replacement for the springs originally fitted to the Rival MT8 and installs on the stock shock bodies and spring cups with no modification. Fitment is specific to the Rival MT8 platform.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089433178434,"sku":"ASC25934","price":13.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25934_md__37205.1725450910.jpg?v=1788547526"},{"product_id":"team-associated-asc25935-rival-mt8-center-braces","title":"Team Associated ASC25935 Rival MT8 Center Braces","description":"\u003cp\u003eThe Team Associated ASC25935 center brace set stiffens and ties together the center section of the Rival MT8 chassis, linking the front and rear of the truck and helping the whole platform resist twisting under load. Chassis braces have a real effect on how a large monster truck behaves, because a flexing chassis makes suspension settings inconsistent from one corner to the next.\u003c\/p\u003e\u003cp\u003eThese braces sit in an exposed spot and take direct hits from landings and rollovers. A cracked brace lets the chassis move in ways it was never meant to, and that shows up as unpredictable handling and extra stress on the bulkheads and mounts around it.\u003c\/p\u003e\u003cp\u003eThis set is a direct replacement for the braces originally fitted to the Rival MT8, using the stock mounting holes and hardware so installation needs no modification. Fitment is specific to the Rival MT8 platform. Fitting fresh braces restores the factory rigidity of the chassis and keeps your suspension setup doing what you expect.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089433801026,"sku":"ASC25935","price":22.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25935_md__77559.1725450912.jpg?v=1788547538"},{"product_id":"team-associated-asc25936-rival-mt8-motor-mounts","title":"Team Associated ASC25936 Rival MT8 Motor Mounts","description":"\u003cp\u003eThe Team Associated ASC25936 motor mount set holds the motor in position on the Rival MT8 and sets the gear mesh between the pinion and the spur gear. Mesh accuracy depends entirely on this mount, so a solid, undamaged mount is what keeps the drivetrain quiet, efficient, and free of premature gear wear.\u003c\/p\u003e\u003cp\u003eMotor mounts see heat from the motor and shock loads from the drivetrain, and slotted adjustment holes can wear over time. A mount that shifts under power lets the mesh open or tighten on its own, which strips gears and robs the truck of drive.\u003c\/p\u003e\u003cp\u003eThis set is a direct replacement for the mount originally fitted to the Rival MT8, using the stock motor screws and chassis mounting locations so no modification is needed. Fitment is specific to the Rival MT8 platform. Fitting a fresh mount is also the right time to reset your gear mesh and check the pinion and spur for wear.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089433833794,"sku":"ASC25936","price":36.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25936_md__47568.1725450914.jpg?v=1788547549"},{"product_id":"team-associated-asc25939-rival-mt8-led-lights","title":"Team Associated ASC25939 Rival MT8 LED Lights","description":"\u003cp\u003eThe Team Associated ASC25939 LED light set adds working lights to the Rival MT8, giving the truck a finished, scale appearance and letting you keep running after the sun goes down. Lighting makes a large monster truck far easier to track at distance, which matters when you are bashing across an open field or a lot in low light.\u003c\/p\u003e\u003cp\u003eThis set is designed specifically for the Rival MT8, so the LEDs and their housings line up with the light positions in the body rather than needing you to improvise mounting or cut new holes.\u003c\/p\u003e\u003cp\u003eWhether you are replacing a set damaged in a crash or adding lights to a truck that came without them, this is the direct fit option for the platform. Fitment is specific to the Rival MT8. Lights take abuse in the same rollovers and impacts the body does, so keeping a spare set on hand means a broken LED never means running dark for the rest of the season.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089433932098,"sku":"ASC25939","price":15.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25939_md__81156.1725450917.jpg?v=1788547561"},{"product_id":"team-associated-asc25941-rival-mt8-body-set","title":"Team Associated ASC25941 Rival MT8 Body Set","description":"\u003cp\u003eThe Team Associated ASC25941 body set is a factory painted replacement shell for the Rival MT8, supplied trimmed and decorated so it goes straight onto the truck with no prep, masking, or curing time. It is the fastest way to put a fresh, finished look back on a truck whose current shell has seen better days.\u003c\/p\u003e\u003cp\u003eThe body on a monster truck this size takes the worst of every rollover, hard landing, and bit of contact with other trucks, and once a shell splits the crack spreads quickly. Beyond appearance, the body shields the chassis, electronics, and drivetrain from dirt and impact.\u003c\/p\u003e\u003cp\u003eThis shell is a direct replacement for the body originally fitted to the Rival MT8, matching the factory body post locations so it mounts on the stock posts without drilling or modification. Fitment is specific to the Rival MT8 platform. Keeping a spare shell on the shelf means a destroyed body never puts the truck out of action.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089433997634,"sku":"ASC25941","price":69.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25941_md__20860.1725450509.jpg?v=1788547574"},{"product_id":"team-associated-asc25943-rival-mt8-rear-shock-bodies","title":"Team Associated ASC25943 Rival MT8 Rear Shock Bodies","description":"\u003cp\u003eThe Team Associated ASC25943 rear shock bodies replace the outer cylinders of the rear shocks on the Rival MT8, the housings that hold the oil and guide the piston and shaft through their stroke. A shock body has to stay perfectly straight and smooth on the inside, because any scoring or distortion causes the piston to bind and the seals to leak.\u003c\/p\u003e\u003cp\u003eDamaged bodies are common on a truck this size. A hard landing or a rock strike can dent or crack a body, and once oil starts weeping past a compromised seal surface the damping fades and the rear of the truck begins bottoming out and landing badly.\u003c\/p\u003e\u003cp\u003eThese bodies are a direct replacement for the rear shock housings originally fitted to the Rival MT8, accepting the stock caps, pistons, shafts, and springs so the rebuild uses your existing internals. Fitment is specific to the Rival MT8 platform. Replacing both rear bodies together keeps damping matched side to side.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089434325314,"sku":"ASC25943","price":24.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25943_md__37165.1725450888.jpg?v=1788547607"},{"product_id":"team-associated-asc25944-rival-mt8-front-shock-bodies","title":"Team Associated ASC25944 Rival MT8 Front Shock Bodies","description":"\u003cp\u003eThe Team Associated ASC25944 front shock bodies replace the outer cylinders of the front shocks on the Rival MT8, holding the oil and guiding the piston and shaft through the full range of suspension travel. The inner surface of a shock body has to stay smooth and true, since scoring or a dent makes the piston bind and destroys the seal it rides against.\u003c\/p\u003e\u003cp\u003eOn a truck the size of the MT8 the front shocks take the brunt of every landing and every impact with an obstacle. Once a body is damaged, oil escapes, damping goes away, and the front end starts diving and packing instead of soaking up hits.\u003c\/p\u003e\u003cp\u003eThese bodies are a direct replacement for the front shock housings originally fitted to the Rival MT8 and accept the stock caps, pistons, shafts, and springs, so you can reuse your existing internals during the rebuild. Fitment is specific to the Rival MT8 platform. Replace both front bodies together to keep damping even.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089436356930,"sku":"ASC25944","price":24.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25944_md__56844.1725450889.jpg?v=1788547665"},{"product_id":"team-associated-asc25945-m5-flanged-locknuts","title":"Team Associated ASC25945 M5 Flanged Locknuts","description":"\u003cp\u003eThese Team Associated ASC25945 M5 flanged locknuts are the fastening hardware used on the Rival MT8, with a nylon insert that grips the thread and resists backing off under the constant vibration and impact a large monster truck generates. The integrated flange spreads clamping load across a wider area, so the nut seats securely without needing a separate washer and without digging into the part beneath it.\u003c\/p\u003e\u003cp\u003eLocknuts are consumable hardware. The nylon insert loses its grip after repeated removal and installation, and a nut that no longer holds torque is how wheels, shocks, and suspension components work loose mid run.\u003c\/p\u003e\u003cp\u003eThese are a direct replacement for the M5 flanged locknuts used on the Rival MT8, matching the original thread size and flange profile so they install with standard tools and no modification. Fitment is listed for the Rival MT8. Keeping a fresh supply in the pit box means you can replace hardware on schedule instead of reusing nuts that have already given up their bite.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089457590594,"sku":"ASC25945","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25945_md__24605.1725450890.jpg?v=1788548605"},{"product_id":"team-associated-asc25946-m5x85mm-shcs-screws","title":"Team Associated ASC25946 M5x85mm SHCS Screws","description":"\u003cp\u003eThese Team Associated ASC25946 M5x85mm socket head cap screws are long fasteners used on the Rival MT8, driven with a hex driver through a recessed socket head. At 85mm they are the long through bolts a large monster truck needs for spanning major assemblies, where a shorter screw simply cannot reach across the parts being clamped together.\u003c\/p\u003e\u003cp\u003eHardware this long carries serious load and is easy to damage. Stripped hex sockets, bent shanks, and galled threads all happen after enough hard impacts and enough disassembly cycles, and a screw you cannot reliably torque is a screw that will let go at the worst moment.\u003c\/p\u003e\u003cp\u003eThese are a direct replacement for the M5x85mm SHCS hardware used on the Rival MT8, matching the original thread, length, and head style so they drop straight into the stock locations. Fitment is listed for the Rival MT8. Rebuilding with fresh screws rather than reusing damaged hardware is cheap insurance on a truck that hits this hard.\u003c\/p\u003e","brand":"Associated","offers":[{"title":"Default Title","offer_id":56089459982658,"sku":"ASC25946","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/files\/25946_md__61896.1725450891.jpg?v=1788548784"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/5063\/8402\/collections\/MT8-tile.png?v=1786493601","url":"https:\/\/www.powerhobby.com\/collections\/mt8-parts.oembed","provider":"PowerHobby","version":"1.0","type":"link"}