www.powerhobby.com

Features: Motor: Neu-Castle 2650 KV motor designed for 1/8 scale Buggy
                 applications (see COMMENTS)
                 Intended for 4S (16.8 Volt) operation
                 Standard Neo rotor on a 5mm shaft
                 High end bearings for trouble free operation
                 Machined integrated cooling fins
                 4 pole, slotted, brushless motors wound 1 turn in a Y
                   configuration
          ESC: Designed for extreme 1/8 scale monster truck applications
               Profiles can be custom designed on a PC
               Infinitely adjustable throttle and brake curves with timing
                 advance
               Punch Control allows dialing in horsepower where needed
               Brake Strength allows straight tracking under hard braking
               Drag Brake helps entry into corners
                Start Power for smooth launches
                Programmable cutoff voltage for lipo usage
                On/Off switch
                Universal receiver connector

Includes: 2650kv Neu/Castle motor
                18T Pinion gear
                Mamba monster version 3 speed control

Specs:  Motor: Length: 67.78mm (2.67")
                 Diameter: 39.98mm(1.57"), 41.78mm (1.6") with fins
                 Weight: 121g (0.27lb)
                 Shaft Diameter: 5mm (.2")
                 Max Input Volts: 16.8V
                 Amp Rating: 120
               Wire Lead Guage: 10 ga

          ESC: 6 cell lipo
               Continuous: N/A
               Resistance: .0003 Ohm
               Brake: Proportional with adjustable curve
               Reversible: Yes, with lockout
               Low Voltage Cut-off: Programmable
               Size: 2.2 x 1.9 x 1.4" (56 x 48 x 35mm)
               Weight: 4.3oz (121g)
               Connector Type: 6.5mm