www.powerhobby.com

Features: Motor: Neu-Castle 2200 KV motor
                 Intended for 4S-6S (16.8-25.2 Volt) operation
                 Designed for Monster Truck and 1/8 scale Truggy applications
                 Comes standard with a Neo rotor on a 5mm shaft
                 High end bearings for trouble free operation
                 Machined integrated cooling fins
                 4 pole, slotted, brushless motors wound 1 turn in a Y
                     configuration
          ESC: Designed for extreme 1/8 scale monster truck applications
               Profiles can be custom designed on a PC
               Infinitely adjustable throttle and brake curves with timing
                 advance
               Punch Control allows dialing in horsepower where needed
               Brake Strength allows straight tracking under hard braking
               Drag Brake helps entry into corners
                Start Power for smooth launches
                Programmable cutoff voltage for lipo usage
                On/Off switch
                Universal receiver connector

Includes: 2200kv Neu/Castle motor
                18 tooth Pinion gear
                Mamba monster version 3 speed control

Specs:    Motor: Length: 75.5mm (2.97")
               Diameter: 40.5mm (1.59")
              Weight: 121g (4.27oz)
              Shaft Diameter: 5mm (.2")
              Max Input Volts: 25.2v
              Amp Rating: 120
              Wire Lead Guage: 10 ga

          ESC: Cells: 18  nicd/nimh 6 cell lipo
                   Continuous: N/A
                   Resistance: .0003 Ohm
                   Brake: Proportional with adjustable curve
                   Reversible: Yes, with lockout
                   Low Voltage Cut-off: Programmable
                   Size: 2.2 x 1.9 x 1.4" (56 x 48 x 35mm)
                  Weight: 4.3oz (121g)
                  Connector Type: 6.5mm